不同边沿高度油池火燃烧行为的实验和数值模拟研究

采用实验和FDS数值模拟相结合的方法,探讨了边沿高度对油池火燃烧特性的影响。在实验部分,研究了燃烧速率和表观火焰高度随边沿高度的变化趋势,并分别分析了各个阶段的热反馈机制。在实验获得不同尺度、边沿高度正庚烷油池火燃烧速率的前提下,建立相应尺度的不同边沿高度油池火的Fire Dynamics Simulator(FDS)计算模型以针对火焰高度进行了数值模拟研究,分析了实际火焰高度、火焰下探高度随边沿高度的变化趋势,并提出了相关的无量纲拟合式。     

企业安全文化评估与企业安全行为的质化研究

通过总结国内外各种不同的安全文化概念,归纳分析了国内外较为流行的近10种安全文化建立模式。在研讨文献的基础上,通过深入访谈、焦点小组与参与观察,归纳构造了一套共11个维度,总题项为152题的安全文化评估量表。通过对选定企业的实证问卷调查,进行统计分析,采用多元逐步回归分析等方法对安全文化各评核因素及整体安全文化进行预测,并以百分数呈现其整体的安全文化现状水平。通过基于扎根理论的各种质化研究方法,对案例企业的安全文化建设和企业安全行为进行研究,得到了7点关于企业安全行为的研究发现,并提出了相应的改进建议。     

火焰原子吸收分光光度法测定鱼内脏及河流底泥中的铜

采用火焰原子吸收分光光度法测定鱼内脏及河流底泥中的铜。鱼内脏经组织捣碎机捣成匀浆后，加硝酸消解；底泥则经氢氟酸和高氯酸消化。该方法具有灵敏度高，精密度和回收率较好等特点。     

煤烟型大气污染解决方法

重点介绍了新型燃煤工艺——水平火焰无烟工业炉及其特点，并提出排烟尾气处理的资源化方案。     

华南玄武岩红土化过程中微量元素地球化学

广东、海南的玄武岩．在强烈的红土化过程中．元素在红土剖面中发生迁移和残留、贫化和富集。根据红土化过程中元素的地球化学性状，将元素划分为活泼元素和不活泼元素两大类。并首次采用了元素它集因子这个概念来探讨红土化过程中微量元素的地球化学行为。最后讨论了红土化过程小金的表生富集作用。     

柱撑粘土材料的环境化学行为

柱撑粘土是一种新型的复合材料，国内外近年来进行了广泛和深入的，本文系统评述了国内外柱撑粘土复合材料的环境化学行为，吸附重金属离子，吸附苯酚类物质，吸附磷类物质，吸附废水中的COD，大气污染等方面，揭示该种新材料在各种污水处理中具有广阔的应用前景。     

水中微量铝的间接原子吸收法测定

在ＨＡｃ－ＮａＡｃ缓冲溶液（ｐＨ４．５）体系中，利用（１－（２－萘酚（ＰＡＮ），Ａｌ＾３＾＋与Ｃｕ＾２＾＋－ＥＤＴＡ发生定量交换反应，用氯仿萃取出Ｃｕ＾２＾＋－ＰＡＮ，用原子吸收法测定水中的Ｃｕ＾２＾＋，以间接测定ＡＬ＾３＾＋。方法的最佳线性范围为０．１－１．０ｍｇ／Ｌ，最低检出浓度为０．１ｍｇ／Ｌ；测定河水，饮用水，地下水中的Ａｌ＾３＾＋，其回收率在８５．０％－１０９％之间，变异系数为１．５％－     

X70钢在碳酸氢钠溶液中的腐蚀行为研究

通过电化学试验方法对X70钢在NaHCO3溶液中的腐蚀行为进行了研究.实验结果表明,当NaHCO3质量分数低于0.10%时,极化曲线呈现阳极活化溶解过程,高于0.10%时阳极极化出现钝化过程,并且在-0.6 V(vs.SCE)左右出现了一个新的小电流峰.通过对交流阻抗谱分析发现,高频区均是由略偏离半圆的容抗弧组成,并且实部有所收缩.HCO3-的还原反应在阴极过程中起主要作用,整个过程受极化控制.X70钢在NaHCO3溶液中的腐蚀速度随着NaHCO3质量分数的增大而增大,在试验结束后,对试样表面的腐蚀形貌进行了观察,并利用XRD分析出腐蚀产物主要为FeO(OH)和Fe3O4.     

The adaptive significance of male polymorphism in the acarid mite Caloglyphus berlesei

Summary Two forms of males occur in the acarid mite, Caloglyphus berlesei. One of them uses its thickened third pair of legs to kill other males; the other, without modified legs, does not attack other males. Previous studies have shown that the form of the male is environmentally determined: fighter males develop only at low population densities and their development can be suppressed by substances emanating from dense colonies. In this study, the duration of development, longevity and virility of the two male morphs were measured. The only significant difference was that fighters had a shorter development time between the two last moults. In another experiment, two groups of colonies were maintained under the same conditions but had different numbers of individuals: small colonies contained 2 fighters and 2 non-fighters, whereas large colonies contained 30 males of each type. The relative reproductive success of both morphs was estimated from numbers of matings. In small colonies, the estimated reproductive success (ERS) was significantly higher for fighters than for non-fighters, mainly because in over 50% of these colonies a single fighter male managed to kill all the rival males and monopolize the females. The opposite was true in large colonies, in which non-fighters achieved significantly higher ERS, mainly because the fighters were killed in fights more often than the non-fighters. This implies that the ratio of costs to benefits obtained by adopting the fighter-male strategy increases with the number of rival males, which may explain conditional male development in C. berlesei.     

Prevention of gasoline vapor explosions in portable fuel containers

Portable Fuel Containers (PFCs) made for consumer use can, under unusual circumstances, develop a flammable atmosphere in the container headspace. In order to prevent an inadvertent ignition from causing flame propagation into this headspace and a subsequent explosion or flame jetting, PFC manufacturers are developing prototype Flame Mitigation Devices (FMDs) for installation in the PFC. A test method is described in this paper to determine if the installed FMD will indeed prevent flame entry into the PFC in a high-challenge flame propagation scenario. The method entails the use of a butane-air mixture ignited in a 5 cm diameter, 12 cm long tube attached to either the container neck or a spout on the container neck. Two concept FMD designs have successfully prevented repeated attempts at flame propagation into the PFC and have also produced encouraging results in tests for fuel flow restriction, duel dispensing nozzle friction, and prolonged fuel exposure. Versions of these tests are currently being promulgated in a draft ASTM standard on PFC FMDs.